Sprocket puller

Fork tube top nut wrench. 1 1/2 inch. OEM style

Fork tube top nut wrench. Slim size allows working around handlebars and instruments

Piston pin tool for removing wrist pins

Piston ring clamps for 75-80 mm pistons. 750 cc Twins

Piston ring clamps for 70-75 mm pistons. 650 cc Twins

Piston ring clamps for 65-70 mm pistons. 500 cc Twins

Stainless cylinder head torque tool for late 650's and 750 models with socket headed head bolts

Cylinder base nut wrench. Thin wall boxes for easier access. 1/2" & 7/16" AF 12 point

Set of 6 chrome Whitworth, open ended wrenches 1/8"-3/16", 3/16"-1/4", 1/4"-5/16

8 Piece Whitworth socket set.
1/8"-3/16", 3/8", 1/2", 1/4"-5/16", 7/16", 9/16"

Set of 6 chrome Whitworth, combination ended wrenches 3/16", 1/4", 5/16", 3/8", 7/16", 1/2"

Tappet adjuster. Holds tappet adjuster while you tighten locknut.

Slide hammer for removing contact breaker advance unit. UNF and CEI threads

Cam wheel puller, 500, 650 models

Rocker spindle o ring guide 350/500 cc

Guide tool for  contact breaker (points) seal

Valve spring compressor, OHV Triumph, BSA, Norton

Valve guide tool set for removing and installing guides.

Crank locator, Finds  TDC & timing marks in flywheel, 1963 and later all twins. Threaded BSF and UNC. Stainless steel

Clutch hub puller 20 TPI, 1969 and later all twins. Stainless steel.

Clutch locking tool. Holds hub and basket together for proper torqueing

Transmission sprocket nut wrench 5 speeds only

Transmission sprocket nut wrench 4 speed 650cc only

Gear box sprocket nut wrench. 1 5/16 and 1 1/2 inch sizes.

P180

Clutch nut screw driver

Timing pinion gear puller

Tappet block removal and installation tool

Triumph wheel bearing lock ring wrench. Stainless steel.

Spoke key. Fits 8 sizes. Small size allows working in tight spots.

Spoke wrench fits 6 sizes

Amal main jet key. Allows removal of main jet without removing float bowl where drain plug is fitted

Fork oil seal holder wrench

Fork tube installation tool. Attachments for most British bikes

Fuel line crimp tool. Crimps up to 1/2 inch OD

Electrical Continuity Tester (use with power off) - Detects open circuit in fuses, switches, and wires (requires one AA battery - Not included). Long 48" leads.

This cable luber powers your favorite spray lube down your cables.   See Instructions

Rim savers. Protect rims from damage when using tire irons. Pair

Stainless steel gasket scraper knife. 9/16 inch blade